System Service Mode
D023/D025 8-254 SM Appendix
084 Non-HDD Firm Up
This setting determines if the firmware can be
updated, even without the HDD installed.
0: Not allowed update
1: Allowed update
085 Firm Up User Check
This SP setting determines if the operator can
confirm the previous version of the firmware before
the firmware update execution. If the option to
confirm the previous version is selected, a
notification is sent to the system manager and the
firmware update is done with the firmware files
from the URL.
086 Firmware Size
Allows the service technician to confirm the size of
the firmware data files during the firmware update
execution.
087 CERT: Macro Version
Displays the macro version of the NRS
certification.
088 CERT: PAC Version Displays the PAC version of the NRS certification.
089 CERT: ID2 Code
Displays ID2 for the NRS certification. Spaces are
displayed as underscores (_). Asteriskes ()
indicate that no NRS certification exists.
090 CERT: Subject
Displays the common name of the NRS
certification subject. CN = the following 17 bytes.
Spaces are displayed as underscores (_).
Asterisks () indicate that no DESS exists.
091 CERT: Serial Number
Displays serial number for the NRS certification.
Asterisks () indicate that no DESS exists.
092 CERT: Issuer
Displays the common name of the issuer of the
NRS certification. CN = the following 30 bytes.
Asteriskes () indicate that no DESS exists.
To Next Page
Loading...
