System Service Mode
SM Appendix 8-263 D023/D025
Appendix
SP Mode
Tables
5828 [Network Setting]
*CTL
-
050 1284 Compatibility (Centro)
Enables or disables 1284 Compatibility.
[0 or 1 / 1 / 1 / step]
0: Disabled, 1: Enabled
052 ECP (Centro)
Enables or disables ECP Compatibility.
[0 or 1 / 1 / 1 / step]
0: Disabled, 1: Enabled
This SP is activated only when
SP5-828-50 is set to "1".
065 Job Spooling
Enables/disables Job Spooling.
[0 or 1 / 0 / 1 / step]
0: Disabled, 1: Enabled
066
Job Spooling Clear: Start
Time
Treatment of the job when a spooled job exists
at power on.
0: ON (Data is cleared)
1: OFF (Automatically printed)
069 Job Spooling (Protocol)
Validates or invalidates the job spooling
function for each protocol.
0: Validates
1: Invalidates
bit0: LPR
bit1: FTP
bit2: IPP
bit3: SMB
bit4: BMLinkS
bit5: DIPRINT
bit6: sftp
bit7: (Reserved)
To Next Page
Loading...
