Ricoh D025 - Page 866

System Service Mode
D023/D025 8-270 SM Appendix
Reso: Print (Color)
This is basically adjusted by the remote system.
[0 to 3 / 2 / 1/step]
123
Selects the resolution for color print mode. This is basically adjusted by the
remote system.
0: 600dpi/ 1: 300dpi/ 2: 150dpi/ 3: 75dpi
Reso: Print (Color)
This is basically adjusted by the remote system.
[0 to 5 / 3 / 1/step]
124
Selects the resolution for BW print mode. This is basically adjusted by the
remote system.
0: 600dpi/ 1: 400dpi/ 2: 300dpi/ 3: 200dpi/ 4: 150dpi/ 5: 100dpi
5839 [IEEE1394]
*CTL -
007 Cycle Master
Turns the cycle master function on/off.
[0 or 1 / 1 / 1 /step]
0: OFF
1: ON
008 BCR mode
Selects either ‘Standard’, 'IRM Color Copy', or
'Always Effective'.
009 IRM 1394a Check
Turns the IRM 1394a check on/off.
[0 or 1 / 0 / - ]
0: OFF
1: ON
If the IRM is not defined as 1394a standard, its
node is used as IRM.