System Service Mode
SM Appendix 8-285 D023/D025
Appendix
SP Mode
Tables
5849 [Installation Date]
*CTL -
5849 1 Display
The “Counter Clear Day” has been changed
to “Installation Date” or “Inst. Date”.
5849 2 Switch to Print
Determines whether the installation date is
printed on the printout for the total counter.
[0 or 1 / 1 / - ]
0: OFF (No Print)
1: ON (Print)
003 Total Counter -
5850 [Address Book Function]
*CTL -
Replacement of Circuit Classification Japan Only
003
The machine is sold ready to use with a G3 line. This SP allows you to switch
all at once to convert to G4 after you add a G4 line. Conversely, if for some
reason the G4 line becomes unusable, you can easily switch back to G3.
[Bluetooth Mode]
5851
Sets the operation mode for the Bluetooth Unit. Press either key.
[0:Public] [1: Private]
[Stamp Data Download]
5853
Use this SP to download the fixed stamp data stored in the firmware of the
ROM and copy it to the HDD. This SP can be executed as many times as
required. This SP must be executed after replacing or formatting the hard
disks.
This SP can be executed only with the hard disks installed.
To Next Page
Loading...
