Ricoh D025 - Page 897

System Service Mode
SM Appendix 8-301 D023/D025
Appendix
SP Mode
Tables
[Skew Correction Control] Not used
6131
Selects the skew correction control for each paper size. These are only
activated for B793.
001 A3T *ENG
002 B4T *ENG
003 A4T *ENG
004 A4Y *ENG
005 B5T *ENG
006 B5Y *ENG
007 DLT-T *ENG
008 LG-T *ENG
009 LT-T *ENG
010 LT-Y *ENG
011 12" x 18" *ENG
012 Other *ENG
[0 or 1 / 1 / 1/step]]
0: No (No skew correction)
1: Roller Stop Skew Correction
[Jogger Fence Fine Adj]
6132
This SP adjusts the distance between the jogger fences and the sides of the
stack on the finisher stapling tray in the Booklet Finisher B793. The adjustment
is done perpendicular to the direction of paper feed.
001 A3T *ENG
002 B4T *ENG
003 A4T *ENG
[-1.5 to 1.5 / 0 / 0.5 mm/step]
+ Value: Increases distance between
jogger fences and the sides of the stack.
- Value: Decreases the distance between
the jogger fences and the sides of the
stack.