Ricoh D025 - Page 949

System Service Mode
SM Appendix 8-353 D023/D025
Appendix
SP Mode
Tables
 When an original is both copied and stored on the document server, the C: and L:
counters both increment.
 When a print job is stored on the document server, only the L: counter increments.
 When the user presses the Document Server button to store the job on the document
server, only the L: counter increments.
 When the user enters document server mode and prints data stored on the document
server, only the L: counter increments.
 When an image received from Palm 2 is received and stored, the L: counter
increments.
 When the customer prints a report (user code list, for example), the O: counter
increments. However, for fax reports and reports executed from the fax application, the
F: counter increments.
8 011 T:Jobs/LS *CTL
8 012 C:Jobs/LS *CTL
8 013 F:Jobs/LS *CTL
8 014 P:Jobs/LS *CTL
8 015 S:Jobs/LS *CTL
8 016 L:Jobs/LS *CTL
8 017 O:Jobs/LS *CTL
These SPs count the number of jobs stored to the
document server by each application, to reveal how
local storage is being used for input.
[0 to 9999999/ 0 / 1]
The L: counter counts the number of jobs stored
from within the document server mode screen at
the operation panel.
 When a scan job is sent to the document server, the S: counter increments. When you
enter document server mode and then scan an original, the L: counter increments.
 When a print job is sent to the document server, the P: counter increments.
 When a network application sends data to the document server, the O: counter
increments.
 When an image from Palm 2 is stored on the document server, the O: counter
increments.
 When a fax is sent to the document server, the F: counter increments.