System Service Mode
SM Appendix 8-357 D023/D025
Appendix
SP Mode
Tables
S:FIN Jobs *CTL
[0 to 9999999/ 0 / 1]
8 065
These SPs total finishing methods for scan jobs only. The finishing method
is specified by the application.
Note: Finishing features for scan jobs are not available at this time.
L:FIN Jobs *CTL
[0 to 9999999/ 0 / 1]
8 066
These SPs total finishing methods for jobs output from within the
document server mode screen at the operation panel. The finishing
method is specified from the print window within document server mode.
O:FIN Jobs *CTL
[0 to 9999999/ 0 / 1]
8 067
These SPs total finishing methods for jobs executed by an external
application, over the network. The finishing method is specified by the
application.
8 06x 1 Sort
Number of jobs started in Sort mode. When a stored copy job
is set for Sort and then stored on the document server, the L:
counter increments. (See SP8 066 1)
8 06x 2 Stack Number of jobs started out of Sort mode.
8 06x 3 Staple Number of jobs started in Staple mode.
8 06x 4 Booklet
Number of jobs started in Booklet mode. If the machine is in
staple mode, the Staple counter also increments.
8 06x 5 Z-Fold
Number of jobs started In any mode other than the Booklet
mode and set for folding (Z-fold).
8 06x 6 Punch
Number of jobs started in Punch mode. When Punch is set for
a print job, the P: counter increments. (See SP8 064 6.)
8 06x 7 Other Reserved. Not used.
To Next Page
Loading...
