[Manual Entry] tab
• Specify the IP address of the host whiteboard by entering it manually. After entering the
address, click [Enter]. A confirmation message about the history appears. If you do not want
to keep the entered IP address in the history, click [Cancel].
• You can also specify a previously entered IP address by selecting it from "IP Address Entry
History".
• "IP Address Entry History" can hold up to 100 entries. If there are already 100 entries, the oldest
entry is deleted from the history.
• The indicated shared page import time may differ depending on the actual environment.
• You can use , the Share icon, to check the communication status while participating in a remote
whiteboard session. For details about the communication status, see page 155 "Checking the
Remote Whiteboard Information".
Participating in a Remote Whiteboard Session
153
To Next Page
Loading...