Message Causes Solutions
Enter from 1 to 1024
characters.
No path column has been
specified, or the number of
characters in the path column is
greater than 1024.
Enter from 1 to 1024 characters in
the path column, and then try again.
Set true or false. The value entered in the
readable column or writable
column is not true or false.
Set true or false in the readable
column and writable column, and
then try again.
Connection has failed
The following are possible
causes.
- The shared folder or the
network settings are
incorrect.
- Cannot access the
network
• The shared folder or the
network settings is
incorrect.
• The shared folder is not
configured to use the CIFS
protocol.
• SMB communication is
prohibited in the network.
• The server with the shared
folder is not correctly
connected to the network.
• The network cable is not
properly connected.
• The IP packet cannot
reach the shared folder
because a different subnet
mask is specified.
• Check the shared folder settings
and the network settings,
change the settings, and then
import the file again if
necessary. For details about the
settings for shared folders, see
page 186 "Managing a Shared
Folder List".
• Make sure that the shared
folder can be accessed from a
computer.
Cannot export.
Cannot find the USB
memory.
Try again after mounting
the USB memory.
No USB flash memory device is
connected.
Insert or reinsert a USB flash memory
device correctly.
For details about how to connect a
USB flash memory device, see
page 31 "Inserting a USB Flash
Memory Device".
If a Message is Displayed during Operation
271
To Next Page
Loading...