Ricoh M126 - Page 237

M126/M127/M128 6-32 SM
Error Description Action
242.12
Second pick from manual feeder, tray
1, or feeder failed when media was in
the source, other sheets were
committed to the paper path.
Check the wear strips and replace
them if worn.
242.16
Failed to feed from tray 2. Pages in the
paper path have been flushed to the
output bin.
Remove Tray 2 and inspect for
obstruction in the paper path. Check
the pick tires for wear or paper dust.
Replace if necessary. Check the
wear strips and replace if necessary.
251.00 Paper jam near the manual feeder.
Inspect the pick roller on the MPF or
the rollers on the manual feed. If the
MPF pick roller is damaged or worn,
then replace the MPF. For a
machine with a manual feed only
(no MPF), clean the roller.
251.10
Second pick attempt failed from
manual feeder.
251.11
Failed to feed from manual feeder.
Pages in the paper path have been
flushed to the output bin.
251.12
Second pick from manual feeder, tray
1, or feeder failed when media was in
the source while the other sheets were
committed to the paper path.
251.19
Media never reached the input sensor
from the manual feeder.
251.20
The media in the MPF has been
pushed in too far.
Remove the media, realign the
stock, and re-insert. Do not let the
top sheets to go beyond the wear
strips.
251.21
The media in the MPF has been
pushed in too far.