Ricoh M126 - Page 252

Messages and Error Codes
SM 6-47 M126/M127/M128
Trouble-
shooting
Error code Description Action
819
Fax transmission failed due to
insufficient memory to store received
image.
Adjust ‘Memory Use’ setting to
allocate more memory for receive
jobs.
81A
A timeout occurred during
transmission of a page in ECM
mode.
Select a lower ‘Max Speed’ value
under Fax Send settings.
880
Failure to transmit training
successfully in V17, V29, V27
terminal modulation schemes.
 Select a lower “Max Speed”
under Fax Send settings.
 Adjust the “Transmit Level”.
 Check line quality.
881
Failure to transmit training
successfully in V33, V29, V27
terminal modulation schemes.
 Select a lower “Max Speed”
under Fax Send settings.
 Adjust the “Transmit Level”.
 Check line quality.
882
Failure to transmit training
successfully in V17, V29 terminal
modulation schemes.
 Select a lower “Max Speed”
under Fax Send settings.
 Adjust the “Transmit Level”.
 Check line quality.
883
Failure to transmit training
successfully in V17,V27 terminal
modulation schemes.
 Select a lower “Max Speed”
under Fax Send settings.
 Adjust the “Transmit Level”.
 Check line quality.
884
Failure to transmit training
successfully in V29, V27 terminal
modulation schemes.
 Select a lower “Max Speed”
under Fax Send settings.
 Adjust the “Transmit Level”.
 Check line quality.
885
Failure to transmit training
successfully in V17terminal
modulation scheme.
 Select a lower “Max Speed”
under Fax Send settings.
 Adjust the “Transmit Level”.
 Check line quality.