Ricoh OR-C1 User Manual

4. Push up the internal finisher [A] from the bottom, and then install the stopper [B] to the bottom side
of the internal finisher ( bind screw x 2; M3x6).
5. Push the internal finisher [A], and then connect the cable [B] to the inlet of the main machine.
6. Reassemble the machine.
7. Turn on the main power switch.
Internal Finisher Type 3352 (D586)
103
2

Ricoh OR-C1 Specifications

General

Brand	Ricoh
Model	OR-C1
Category	Printer
Language	English