Ricoh OR-C1 - Page 336

Jam Code
SP
Display Description
LCD
Display
7-504-013 Vertical Trans .3: On
Vertical transport sensor 1 or relay sensor
does not detect paper from tray 3 (LCT).
Y
7-504-017 Registration: On Registration sensor does not detect paper. A
7-504-020 Paper Exit: On Paper exit sensor does not detect paper. C
7-504-021 Bridge Tray Exit: On
Tray exit sensor (bridge unit) does not detect
paper.
D
7-504-022 Bridge Relay: On
Relay sensor (bridge unit) does not detect
paper.
D
7-504-024 Inverter: On
Junction gate jam sensor does not detect
paper.
C
7-504-025 Duplex Exit: On Duplex exit sensor does not detect paper. Z
7-504-027 Duplex Entrance: On
Duplex entrance sensor does not detect paper
again after paper has passed this sensor.
Z
7-504-051 Vertical Trans. 1: Off Vertical transport sensor 1 does not turn off. A
7-504-052 Vertical Trans. 2: Off Vertical transport sensor 2 does not turn off. A
7-504-053
Vertical Trans. 3 (PFU):
Off
Vertical transport sensor 3 or relay sensor 1
does not turn off.
Y
7-504-054
Vertical Trans. 4 (PFU):
Off
Vertical transport sensor 4 does not turn off. Y
7-504-057 Registration Sensor: Off Registration sensor does not turn off. B
7-504-060 Paper Exit: Off Paper exit sensor does not turn off. C
7-504-061 Bridge Tray Exit: Off Tray exit sensor (bridge unit) does not turn off. D
7-504-062 Bridge Relay: Off Relay sensor (bridge unit) does not turn off. D
7-504-064 Inverter: Off Junction gate jam sensor does not turn off. C
7-504-065 Duplex Exit: Off Duplex exit sensor does not turn off. Z
7-504-067 Duplex Ent: Off
Duplex entrance sensor does not turn off after
paper has passed this sensor.
Z
6. Troubleshooting
334
6