Jam Code
SP
Display Description
LCD
Display
7-504-100 Finisher Entrance (D588)
Paper does not reach the entrance sensor or
stay at the entrance sensor.
R1-R2
7-504-101
Finisher Shift Tray Exit
(D588)
Paper does not reach the lower tray exit
sensor or stay at the lower tray exit sensor.
R1-R2
7-504-102 Finisher Staple (D588)
Paper does not reach the staple tray entrance
sensor or stay at the staple tray entrance
sensor.
R3-R5
7-504-103 Finisher Exit (D588)
Lower tray exit sensor does not detect paper
after the stack feed-out belt has fed paper.
Lower tray exit sensor still detects paper after
the stack feed-out belt has returned to the
home position.
R3-R5
7-504-105
Finisher Tray Lift Motor
(D588)
Stack height sensor does not detect paper
after the lower tray has lifted up.
Stack height sensor still detects paper after the
lower tray has lifted down.
R1-R2
7-504-106
Finisher Jogger Motor
(D588)
Jogger fence HP sensor does not turn off after
the jogger fence has moved from its home
position.
Jogger fence HP sensor does not turn on after
the jogger fence has returned to its home
position.
R3-R5
7-504-107
Finisher Shift Motor
(D588)
Shift roller HP sensor does not turn off after the
shift roller has moved from its home position.
Shift roller HP sensor does not turn on after the
shift roller has returned to its home position.
R1-R2
7-504-108
Finisher Staple Motor
(D588)
Stapler HP sensor does not turn off after the
stapler has moved from its home position.
Stapler HP sensor does not turn on after the
stapler has returned to its home position.
R3-R5
Jam Detection
335
To Next Page
Loading...
