No. Type Details (Symptom, Possible Cause, Troubleshooting Procedures)
791 D
Bridge unit error
The machine recognizes the finisher, but does not recognize the bridge unit.
• Defective connector
•
Broken harness
1.
Check the connections between the bridge unit and the machine.
2. Install a new bridge unit.
No. Type Details (Symptom, Possible Cause, Troubleshooting Procedures)
792 B
Finisher error
The machine does not recognize the finisher, but recognizes the bridge unit.
• Defective connector
• Defective harness
•
Incorrect installation
1. Check the connections between the finisher and the machine.
2. Install a new finisher.
No. Type Details (Symptom, Possible Cause, Troubleshooting Procedures)
793-
01
B Front jogger motor error with 1-bin tray (D586)
794-
01
D Front jogger motor error without 1-bin tray (D586)
3. Appendix: Service Call Conditions
88