20
High:3rd CPM Down
Temp.:A5:Press
Specifies the pressure roller temperature for 3rd
CPM down of A5 paper size.
[100 to 250 / 210 / 1 deg/step]
21
High:1st CPM Down
Temp.:A6:Press
Specifies the pressure roller temperature for 1st
CPM down of A6 paper size.
[100 to 250 / 200 / 1 deg/step]
22
High:2nd CPM Down
Temp.:A6:Press
Specifies the pressure roller temperature for 2nd
CPM down of A6 paper size.
[100 to 250 / 205 / 1 deg/step]
23
High:3rd CPM Down
Temp.:A6:Press
Specifies the pressure roller temperature for 3rd
CPM down of A6 paper size.
[100 to 250 / 210 / 1 deg/step]
24 Judging Interval
Specifies the interval for CPM down judgement.
[1 to 250 / 10 / 1 sec/step]
1152*
Fusing Nip Band Check
Checks the fusing nip band.
1 Execute
Executes the fusing nip band check from the by-
pass tray.
2* Pre-idling Time
Specifies the fusing rotation time before
executing SP1152-001.
[0 to 999 / 20 / 1 sec/step]
3* Stop Time
Specifies the time for paper staying at the nip.
[0 to 100 / 20 / 1 sec/step]
1159*
Fusing Jam Detection
Disables or enables the consecutive jam error for the fusing unit.
[0 to 1 / 0 / 1 Step]
When set to "1" (on) this SC code is issued after the 3rd consecutive jam in the fusing
unit.
1801* MotorSpeedAdjust
System SP Tables-1
133