8. Attach the appropriate paper tray number decal [A] and paper size decal [B] to the line [C] on the
tray of the LCT.
• The paper tray number and size sheet is in the accessory box of the main machine.
9. Lock the caster stoppers for the front two casters under the paper feed unit.
10. Load paper into the LCT.
11. Connect the power cord [A] to the inlet of the main machine.
12. Secure the power cord with the clamp [B] on the main machine so that the power cord is never
disconnected.
SP Settings
1. Connect the copier and turn the main machine on.
2. Installation
60
To Next Page
Loading...
