Ricoh OR-C1 - Punch Kit PU3000 (B807)

6. Attach the rear joint bracket [A] ( x 1; M4x25).
7. Attach the front joint bracket [B] ( x 2; M4x25).
8. Slowly push the finisher to the left side of the machine, keeping its front door open until the brackets
[A] [B] go into their slots.
9.
Push the lock lever [C], and then secure it (Long knob screw x 1).
10.
Close the front door of the finisher.
11.
Connect the finisher connector [D] to the machine.
2. Installation
84
2