Ricoh Pro C5200s User Manual

When using the Z-fold function with Finisher SR4120 or Booklet Finisher SR4130 and
Multi-folding unit
To use the Z-fold function, you must attach the Z-fold support tray.
Finisher SR4120 and Booklet Finisher SR4130
• Finisher upper tray
1. Remove the output paper.
2. Attach the Z-fold support tray to the finisher upper tray.
• Z-fold support tray 1
When using paper whose size is other than A5, A6, B6 JIS, or special paper, attach the
Z-fold support tray 1
*1
.
*1 The back of the Z-fold support tray 1 is embossed with "1".
DPZ170
• Z-fold support tray 2
When the paper size is A5, A6, or B6 JIS, attach the Z-fold support tray 2
*2
.
*2 The back of the Z-fold support tray 2 is embossed with "2".
CNM016
• Finisher shift tray (Only when using Booklet Finisher SR4130)
1. If the finisher is installed with the cooling fan unit, press the [Suspend / Resume] key near
the paper outlet port.
Guide to Functions of the Machine's Options
35

Ricoh Pro C5200s Specifications

General

Print Technology	Laser
Max Paper Size	330.2 x 487.7 mm
Monthly Duty Cycle	300, 000 pages
Print Speed	65 ppm
Resolution	1200 x 4800 dpi
Paper Input Capacity	8, 250 sheets
Paper Weight	52 to 360 gsm
Duplex Printing	Standard
Network Connectivity	Ethernet 10Base-T/100Base-TX/1000Base-T
Supported Media Sizes	A3, A4, A5, B4, B5
Supported Media Types	Plain, Recycled, Coated, Envelope
Warm-up Time	Less than 5 minutes