Ricoh Pro C5300S - Page 171

To display the custom size setting screen, on the initial scanner screen, press [Scan Settings] > [Scan
Size] > [Custom Size].
The following table explains how to measure custom size originals and how to specify the scan settings
on the custom size setting screen.
How to measure sizes
Orientation and placement of original
Measuring method for scanning the entire area of a
custom size original
In the or orientation on the
exposure glass or in the ADF
CUJ001
In the or orientation on the
exposure glass or in the ADF
CUJ002
Scan settings on the custom size setting screen
1
2
DLY002
1. Original Size (X)
Specify the length of the original.
Enter the actual length in [X] then press [
].
2. Original Size (Y)
Specify the width of the original.
Enter the actual width in [Y] then press [ ].
Procedure for Specifying Scan Settings
169