Ricoh Pro C7500 - Page 140

To Next Page

To Previous Page

3. Is the toner fusibility within the permissible range?

• The required level of fusibility is as follows.

• The printed image does not come off.

• The toner does not come off even if it is lightly rubbed by a nail.

• The toner does not come off even if it is rubbed by the cloth for cleaning the contact

glass.

Yes Finished!

No Change the print speed to "Low". Go to "(c) Changing the fusing temperature (If

[Print Speed] is set to [Low])".

1. In [Detailed settings] for the custom paper you are using, select 1232: [Fusing

Temperature], and then decrease the value in the following corresponding settings by

20°C.

• 1232-01: Fusing Temperature: BW/FC/FCS: Heat Roller Temp

• 1232-06: Fusing Temperature: FCS: Heat Roller Temp: Clear/Special

• 1232-07: Fusing Temperature: FCS: Heat Roller Temp: White

• 1232-08: Fusing Temperature: FCS: Heat Roller Temp: Metallic

• 1232-26: Fusing Temperature: S: Heat Roller Temp: Clear/Special

• 1232-27: Fusing Temperature: S: Heat Roller Temp: White

• 1232-28: Fusing Temperature: S: Heat Roller Temp: Metallic

• 1232-46: Fusing Temperature: BW/FC/FCS: Fuser Setting HQ: Heat Roller Temp

• 1232-51: Fusing Temperature: FCS: Fuser Setting HQ: Heat Roller Temp: Clear/Special

• 1232-52: Fusing Temperature: FCS: Fuser Setting HQ: Heat Roller Temp: White

• 1232-53: Fusing Temperature: FCS: Fuser Setting HQ: Heat Roller Temp: Metallic

• 1232-71: Fusing Temperature: S: Fuser Setting HQ: Heat Roller Temp: Clear/Special

• 1232-72: Fusing Temperature: S: Fuser Setting HQ: Heat Roller Temp: White

• 1232-73: Fusing Temperature: S: Fuser Setting HQ: Heat Roller Temp: Metallic

2. Select [Correct Temp: Initial Feed], and then set the value in the following corresponding

settings to 0°C.

• 1232-02: Fusing Temperature: BW/FC/FCS: Correct Temp: Initial Feed

• 1232-10: Fusing Temperature: FCS: Correct Temp: Initial Feed: Clear/Special

• 1232-11: Fusing Temperature: FCS: Correct Temp: Initial Feed: White

4. Image Quality Problem: Full Page

138

Other manuals for Ricoh Pro C7500