10. Troubles Related to Paper Feeding
and Delivery (Vacuum Feed LCIT
RT5150)
Vacuum Feed LCIT RT5150
Common Troubleshooting
If trouble occurs, first check the following.
1. Check if the specified paper length matches that of the loaded paper.
Yes Go to the next step.
No Specify the paper size correctly, and then load the paper.
2. Check if the side fences and end fence of the paper feed tray are positioned correctly.
For details, see page 276 "Attaching the Side Fences and End Fence Correctly".
3. Measure the paper curl.
If the curl exceeds the acceptable range, decurl the paper.
If the curl is within the acceptable range, go to the next step.
For details on measuring and decurling the curl, see page 280 "Measuring the Curl / Decurling".
4. Check if the paper is curled upward or downward.
Yes Load the sheets the other way up.
No Go to the next step.
5. Fan the paper.
For details, see page 199 "Fanning the Paper".
Double Feeding (J099, J470, J471, J485, J486, J500, J501)
Cause:
The cause may vary depending on the paper and operating environment.
267
To Next Page
Loading...
