Skew
J097 (Excessive Skew)
Cause:
• The side fences of the paper feed tray are not positioned correctly.
• The paper type is not specified correctly.
• Colored paper or envelopes are being fed.
• Sheets of mixed paper types, thickness, or colors are loaded in the same paper feed tray.
• The surface of the CIS sensor in the transfer unit is stained with paper dust.
Solution:
1. Fan the paper.
For details, see page 199 "Fanning the Paper".
2. Correctly position the side fences and end fence of the paper feed tray.
3. Print and check if J097 has been resolved.
Yes Finished!
No If the paper is being fed from the machine's paper feed tray, go to the next step.
If the paper is being fed from the Vacuum Feed LCIT RT5150 (LCT) adopting the air
pick system, see page 273 "Excessive Skew/Shifting (J097, J098)".
4. Check if the paper is stained with any paper dust.
Yes Go to the next step.
8. Troubles Related to Paper Feeding and Delivery (Main)
260
To Next Page
Loading...
