Solution:
1. If the paper is not registered as custom paper, register the brand of the paper.
2. In the [Machine: Image Quality] group on the [Operator Adjust.] menu, select 0201:
[Execute Image Quality Adjustment] and execute 04: [Adjust Image Density (Including
special color)].
3. Print the image. Has the problem been resolved?
• Performing this once may not be sufficient to achieve the desired effect. If you perform image
density adjustment and check its result 3 times and the problem still persists, go to the next step
(image process adjustment).
Yes Finished!
No Go to the next step.
4. In the [Machine: Maintenance] group on the [Operator Adjust.] menu, execute 0501-01:
[Execute Process Adjustment].
5. Print the image. Has the problem been resolved?
Yes Finished!
No No further improvement.
If you perform image process adjustment and check its result 3 times and the
problem still persists, contact your service representative.
• If you perform image process adjustment and check its result 3 times and the problem still persists,
contact your service representative.
Toner Stains of Mixed Colors (Horizontal Streaks)
Multi-color toner stains occur in the form of horizontal streaks.
Dirtied Printouts
51
To Next Page
Loading...
