• 1237-02: Print Speed (Sheet Interval Adj): FCS: Clear/Special
• 1237-03: Print Speed (Sheet Interval Adj): FCS: White
• 1237-04: Print Speed (Sheet Interval Adj): FCS: Metallic
For example, if the present value is "100%", change it to "80%".
4. Print 2 or more sheet. Has the problem been resolved?
Yes Finished!
No Repeat Step 3 to 4.
If the problem still persists, contact your service representative.
• Select "Clear/Special" when using Neon Yellow, Neon Pink, or Invisible Red. Select "Metallic"
when using Gold or Silver.
Toner Blasting (Lines)
Toner blasting occurs to part of line images.
This may occur in a line that is 5 mm (0.2 inches) or less from the leading edge, or in a line that is 1.5 to
5 mm (0.06 to 0.2 inches) from an image on the side of the image facing the trailing edge.
CEZ546
5 mm (0.2 in.)
1.5 - 5 mm (0.06 - 0.2 in.)
Cause:
A high amount of toner is prone to adhere to line images, causing toner blasting. This is especially prone
to occur on slippery paper such as coated paper.
4. Image Quality Problem: Full Page
40
To Next Page
Loading...
