Paper Bending or Paper Jams (J034 / J035 / J036 / J084 / J085 / J086)
Cause:
There is a lever on the left drawer unit of the main unit to switch when feeding small paper of length 179
mm (7.1 inches) or less. Failing to switch this lever causes paper bending or paper jams.
[A]: Setting for large paper (paper size of 179.1 mm or longer)
[B]: Setting for small paper (paper size below 179.1 mm)
Feeding large paper with the setting for small paper (with the lever lowered) may cause paper bending
or paper jams.
• Paper bending [A]
Paper bends in its center perpendicular to the paper feed direction. (This is prone to occur with thin
paper.)
• Paper Jam (J034 / J035 / J036 / J084 / J085 / J086)
Paper jams occur near the paper exit due to paper bending.
• Chain of creases
Vertical creases of approximately 170 mm (7.1 inches) long occur.
8. Troubles Related to Paper Feeding and Delivery (Main)
258
To Next Page
Loading...
