Cause:
When the temperature of the environment is low, such as on a wintery morning, the resistance of the
paper transfer bias roller increases, resulting in insufficient transfer current in the paper transfer unit,
causing a paper transfer failure.
Solution:
• Turn the printer on about 1 hour before printing.
• Raise the temperature.
• Set the machine's anti-condensation heater switch to "ON".
If the problem persists, there is no other solution. Contact your service representative.
Mottling of Uneven Density on Half-Tone Images
Mottling occurs in halftone sections.
4. Image Quality Problem: Full Page
82
To Next Page
Loading...
