Other Post- Processing Options
Thin Paper may have Problems such as Curling, Stacking Error, Paper Jam,
and Sheets being Bent at the Corners
Thin paper and other paper that requires high fusing temperatures are prone to curl due to the large
temperature difference between the fused and pressurized sides.
As a result, the following problems may occur when delivering the paper.
• Paper curling
• Not stacked properly
• Paper jams
• Folded edges
Solution:
• You need to register the paper as custom paper in advance.
1. In [Detailed settings] for the custom paper you are using, select 1321: [Correct Paper
Curl], and then set [Correction Mode] to [U Curl Correction Level: Large] or [П Curl
Correction Level: Large] according to the curl.
2. Print the image. Has the problem been resolved?
Yes Finished!
No Go to the next step.
11. Post-Processing Option Troubleshooting
314
To Next Page
Loading...
