No Start over from Step 5.
7. Is the toner fusibility within the permissible range?
• The required level of fusibility is as follows.
• The printed image does not come off.
• The toner does not come off even if it is lightly rubbed by a nail.
• The toner does not come off even if it is rubbed by the cloth for cleaning the contact
glass.
Yes Finished!
No Contact your service representative.
• Select "Clear/Special" when using Neon Yellow, Neon Pink, or Invisible Red. Select "Metallic"
when using Gold or Silver.
• When printing many sheets of images with high coverage, substantial toner wax adheres to the
fusing belt and worsens the ghosting. In such a case, the ghosting can be reduced by executing 02:
"Uneven Gloss (Short Time)" in 0508 "Manually Smooth Fusing Belt" in Adjustment Settings for
Operators 1 to 5 times.
• After performing the solution, it is recommended to perform the color calibration of the external
printer controller.
Multiple Horizontal Glossy Streaks (Glossy Ghosting)
Multiple horizontal glossy lines appear.
Uneven Density
71
To Next Page
Loading...
