13. In [Detailed settings] for the custom paper you are using, set 1321: [Correct Paper Curl]
to [П Curl Correction Level: Large].
14. Print the image. Has the problem been resolved?
Yes Finished!
No Cannot be solved by this flow.
Paper Edges Are Stained
The leading edge of paper is stained [A] for a width of 10 mm (0.4 inches) at the area 25 mm (0.1
inches) and 94 mm (3.7 inches) away from its center.
M0EDIC1364
10 1025
10 1094
25
[A]
94
Cause:
The paper feed roller is stained with toner.
The entrance roller, which provides the path for the shift tray and proof tray, is especially prone to get
stained.
Solution:
For information on cleaning the paper feed rollers, see "249 First Stacker: Paper Path 1/ 252 Second
Stacker: Paper Path 1", Regular Maintenance Guide.
High Capacity Stacker
313
To Next Page
Loading...
