2. Check for side upward curls.
Yes Go to the next step.
No Not possible to resolve the problem
3. Load the sheets the other way up.
4. Print the image. Has the problem been resolved?
Yes Finished!
No Go to the next step.
5. In [Detailed settings] for the custom paper you are using, set 1321: [Correct Paper Curl]
to [Off].
6. Print the image. Has the problem been resolved?
Yes Finished!
No Go to the next step.
7. In [Detailed settings] for the custom paper you are using, set 1321: [Correct Paper Curl]
to [U Curl Correction Level: Small].
8. Print the image. Has the problem been resolved?
Yes Finished!
No Go to the next step.
9. In [Detailed settings] for the custom paper you are using, set 1321: [Correct Paper Curl]
to [U Curl Correction Level: Large].
10. Print the image. Has the problem been resolved?
Yes Finished!
No Go to the next step.
11. In [Detailed settings] for the custom paper you are using, set 1321: [Correct Paper Curl]
to [П Curl Correction Level: Small].
12. Print the image. Has the problem been resolved?
Yes Finished!
No Go to the next step.
11. Post-Processing Option Troubleshooting
312
To Next Page
Loading...
