6. Print 10 or more A3 sheets. Has the problem been resolved?
Yes Proceed to Step 7.
No Start over from Step 5.
7. Is the toner fusibility within the permissible range?
• The required level of fusibility is as follows.
• The printed image does not come off.
• The toner does not come off even if it is lightly rubbed by a nail.
• The toner does not come off even if it is rubbed by the cloth for cleaning the contact
glass.
Yes Finished!
No Contact your service representative.
• Select "Clear/Special" when using Neon Yellow, Neon Pink, or Invisible Red. Select "Metallic"
when using Gold or Silver.
• After performing the solution, it is recommended to perform the color calibration of the external
printer controller.
Solution: (Thin paper)
Change the paper feed direction from the grain to cross-grain direction.
If the problem persists or is not reduced, there is no other solution.
Worm Marks, Creases, and Fusing Errors on Envelopes
Worm marks or creases occur on envelopes. Or fusing errors occur.
Uneven Density
109
To Next Page
Loading...
