Ricoh Pro C7500 - 9 Related to Paper Feeding and Delivery (Main;Buffer Pass Unit); Roller Marks Appearing When Dark-Color Paper Is Fed after White Paper

9. Related to Paper Feeding and
Delivery (Main/Buffer Pass Unit)
Roller Marks Appearing When Dark-Color
Paper Is Fed after White Paper
Roller Marks Appearing When Dark-Color Paper is Fed after White Paper
When black or other dark-color paper is fed after white paper, roller marks may appear.
Roller marks appear at the following positions.
• In the area 33 mm (1.3 inches) away from the center of the paper (roller mark approximately 14
mm (0.6 inches) wide)
• In the area 26 mm (1.0 inches) away from the center of the paper (roller mark approximately 28
mm (1.1 inches) wide)
14m
33m
33m
14m
1
28m
26m
26m
28m
2
M0EBIC0113
Cause:
The machine's left drawer unit and the drive rollers (rubber rollers) of the buffer pass unit (optional) are
stained.
Solution:
Clean the machine's left drawer unit and the rollers of the buffer pass unit before feeding dark-color
paper.
• See page 213 "Cleaning the Rollers in the Paper Exit"
• Left Drawer Unit [A]
265