• If the problem worsens, conversely increase the line speed of the transfer timing roller in steps of
0.1% within the range up to 0.5%, and then apply the optimal result.
• If the print result is unsatisfactory even after adjusting the value within ±0.5%, there is no other
solution.
• If no change is observed after changing the value, restore the previous setting.
Faint Small Solid-Fill Images
The small solid-fill images are faint or have streaks on them.
Cause:
At high temperature and humidity, the toner static charge is prone to be low. If a small-size solid-fill color
image is printed, the charge becomes insufficient during intermediate (image) transfer, resulting in
deteriorated paper transferability.
Solution:
1. If the paper is not registered as custom paper, register the brand of the paper.
2. In [Detailed settings] for custom paper, select 1212: [Image Transfer Output] and
increase the value by one step.
• 1212-03: Image Transfer Output: FC/FCS: Cyan
• 1212-04: Image Transfer Output: FC/FCS: Magenta
• 1212-05: Image Transfer Output: FC/FCS: Yellow
3. Print the image. Has the problem been resolved?
Yes Finished!
4. Image Quality Problem: Full Page
60
To Next Page
Loading...
