Acceptable curl
A curl within ±10 mm throughout the sheet is acceptable.
Decurling
1. Place the sheet on a flat surface with the curl facing downward.
2. Holding an edge of the paper, curl it in the opposite direction to decurl it.
• Decurl the paper until the curl is within the acceptable range.
• If double-feeding occurs: The curl is better if it is downward.
• If paper misfeeds occur: The curl is better if it is upward.
3. Decurl the other edge in the same way.
Cleaning the Vacuum Feed LCIT RT5150
Cleaning the Paper Feed Belt
• For details on cleaning, see "241 2-Tray LCT: Tray 3, 4 : Feed Belt/ 242 2-Tray LCT: Tray 5, 6 :
Feed Belt/243 2-Tray LCT: Tray 7, 8 : Feed Belt" in the Regular Maintenance Guide.
Vacuum Feed LCIT RT5150
281
To Next Page
Loading...
