Cleaning the registration entrance transport roller
Wipe the registration entrance transport roller (drive) [A] and registration entrance transport roller
(driven) [B] with a cloth moistened with alcohol. Pressing the cloth against the roller, wipe the surface of
the roller while turning the knob [C].
Wipe the registration Exit transport roller (drive) [A] with a cloth moistened with alcohol. Pressing the
cloth against the roller, wipe the surface of the roller while turning the knob [B].
Cleaning the output relay roller
Wipe the output relay roller with a cloth moistened with alcohol.
Pull up and open the cover D4.
1. Wipe the roller [A] and [B] with a cloth moistened with alcohol.
Pressing the cloth against the roller, wipe the surface of the roller [A] while turning the gear [C].
8. Troubles Related to Paper Feeding and Delivery (Main)
214
To Next Page
Loading...
