4. When using paper with a thickness of Paper Weight 6 or above, move the paper retainer
away.
If using paper with a thickness of Paper Weight 5 or below, extend the paper retainer.
For details, see page 283 "Using the Paper Retainer Correctly".
5. With a paper weight of 350.1 gsm to 360 gsm, check if it is registered to the Master
Library.
Yes Go to the next step.
No In [Detailed settings] for custom paper, select 1302: [2-Tray LCT: Vacuum Fan
Level] and change the value to 10% above the default setting.
6. To feed paper from Vacuum Feed Banner Sheet Tray Type S9, attach the side fences and
end fence for long paper.
• For paper with a length of 420.0 mm to 559.9 mm (16.5 inches to 22.0 inches), attach the 2
short end fences.
• For paper with a length of 560.0 mm to 700.0 mm (22.0 inches to 27.6 inches), attach the 1
long end fence.
Vacuum Feed LCIT RT5150
271
To Next Page
Loading...
