The end fences are positioned too narrowly.
The end fence is positioned too narrowly so that the paper is arched, causing the paper's resistance
to be lifted at the front edge which results in paper misfeeds.
Solution:
Lifting the paper with it arched vertical to the paper feed direction up to the bottom part of the end
fence leaf spring, measure with a scale the gap between the paper and end fence.
Position the end fence so that the gap between it and the paper is 1 mm to 2 mm.
• To move the end fence, unlock it.
10. Troubles Related to Paper Feeding and Delivery (Vacuum Feed LCIT RT5150)
278
To Next Page
Loading...
