3. Print the image. Has the problem been resolved?
Yes Finished!
No Go to the next step.
• Increasing the value increases the density. If it becomes too thick by the abovementioned
adjustment, increase the value by one step at a time.
• Toner consumption increases as the density is increased.
4. Select 1212: [Image Transfer Output], and then decrease the value in the following
corresponding settings by "5"
• 1212-01: Image Transfer Output: BW: Black
• 1212-02: Image Transfer Output: FC/FCS: Black
• 1212-03: Image Transfer Output: FC/FCS: Cyan
• 1212-04: Image Transfer Output: FC/FCS: Magenta
• 1212-05: Image Transfer Output: FC/FCS: Yellow
• 1212-06: Image Transfer Output: FC/FCS: Clear/Special
• 1212-07: Image Transfer Output: FC/FCS: White
• 1212-08: Image Transfer Output: FC/FCS: Metallic
• 1212-10: Image Transfer Output: S: Clear/Special
• 1212-11: Image Transfer Output: S: White
• 1212-12: Image Transfer Output: S: Metallic
5. Select 1214: [Paper Transfer Output], and then increase the value in the following
corresponding settings by "2".
• 1214-01: Paper Transfer Output: BW: Side 1
• 1214-02: Paper Transfer Output: BW: Side 2
• 1214-03: Paper Transfer Output: BW: Side 1: AC
• 1214-04: Paper Transfer Output: BW: Side 2: AC
• 1214-05: Paper Transfer Output: FC/FCS: Side 1
• 1214-06: Paper Transfer Output: FC/FCS: Side 2
• 1214-07: Paper Transfer Output: FC/FCS: Side 1: AC
• 1214-08: Paper Transfer Output: FC/FCS: Side 2: AC
• 1214-09: Paper Transfer Output: FCS: Side 1
• 1214-10: Paper Transfer Output: FCS: Side 2
4. Image Quality Problem: Full Page
80
To Next Page
Loading...
