No. Function Description
6 Current Settings You can check the settings in [Settings].
7 Settings Press to open the settings screen.
8 Start Press to scan originals and start sending.
9 Display Tab Switch Press to switch the section of the Address Book.
10 Destination keys Shows the destinations in the Address Book.
11 Address Tab
Press the title word key where the desired destination is
programmed.
For example, if you want to specify "New York Office", press
[LMN].
12 Add Destination
Press to add a destination.
Destinations can be added as follows:
• Input destinations manually
• Select from the transmission history
• Specify a registration number from the Address Book
• Search for a destination in the Address Book or on the LDAP
server
• Press to display the Remaining Memory Information
• If you specify many destinations, the machine might require some time to start scanning originals
after [Start] is pressed.
Guide to Applications Installed on the Machine
41
To Next Page
Loading...
