Rigol DS2000E Series

2 Command System RIGOL
DS2000E Programming Guide
2-131
:MASK:OUTPut
Syntax
:MASK:OUTPut <type>
:MASK:OUTPut?
Description
Set or query the output mode when the test fails.
Parameter
Name Type Range Default
<type> Discrete {FAIL|FSOund} FAIL
Explanation
 FAIL: when a failed waveform is detected, the oscilloscope displays the statistic results and outputs a
pulse; but the beeper does not sound.
 FSOund: when a failed waveform is detected, the oscilloscope displays the statistic results and
outputs a pulse; while at the same time, the beeper sounds (not related to the on/off state of the
sound).
Return Format
The query returns FAIL or FSO.