Rigol DS2000E Series

2 Command System RIGOL
DS2000E Programming Guide
2-69
:CALCulate:ADVanced
 :CALCulate:ADVanced:EXPRession
 :CALCulate:ADVanced:INVert
 :CALCulate:ADVanced:VARiable1
 :CALCulate:ADVanced:VARiable2
 :CALCulate:ADVanced:VSCale
 :CALCulate:ADVanced:VOFFset
:CALCulate:ADVanced:EXPRession
Syntax
:CALCulate:ADVanced:EXPRession <expression>
:CALCulate:ADVanced:EXPRession?
Description
Set or query the expression of advanced operation.
Parameter
Name Type Range Default
<expression> ASCII string Refer to Explanation CH1+CH2
Explanation
Input valid expressions using the characters as shown in the figure below.
Note: The length of the expression should be no greater than 64 bytes.
Return Format
The query returns the current expression in string.