Rigol DS2000E Series

RIGOL 2 Command System
2-146 DS2000E Programming Guide
:MEASure:CREGion:CAX
:MEASure:CREGion:CBX
Syntax
:MEASure:CREGion:CAX <cax>
:MEASure:CREGion:CAX?
:MEASure:CREGion:CBX <cbx>
:MEASure:CREGion:CBX?
Description
When the measurement range is set to cursor region, use this command to set or query the position of
cursor A.
When the measurement range is set to cursor region, use this command to set or query the position of
cursor B.
Parameter
Name Type Range Default
<cax> Integer 0 to (the current position of cursor B - 6) 300
<cbx> Integer (The current position of cursor A + 6) to 697 400
Explanation
You can use the
:MEASure:AREA command to set the measurement range to cursor region.
Return Format
The query returns the position of cursor A or B in integer.