Rigol DS2000E Series Programming Guide

RIGOL 2 Command System
2-222 DS2000E Programming Guide
:SAVE:MTESt[:STARt]
Syntax
:SAVE:MTESt[:STARt] {<internal_loc>|<file_spec>}
Description
Store the current pass/fail test mask into the internal or external memory in "*.pf" format.
Parameter
Name Type Range Default
<internal_loc> ASCII string C:\LocalPF0.pf to C:\LocalPF9.pf --
<file_spec> ASCII string Refer to Explanation --
Explanation
 This command is only available when the pass/fail test function is enabled (refer to
:MASK:ENABle).
 In internal storage, if the specified location already contains a file, the original file will be overwritten.
 In external storage, <file_ spec> includes the external storage directory and the filename with suffix.
Its length cannot exceed 64 characters. Wherein, the storage directory can only be D:\. If the
specified directory already contains a file with the same filename, the original file will be overwritten.
Example
:SAVE:MTESt C:\LocalPF3.pf /*Store the current pass/fail test mask into the internal memory*/

Rigol DS2000E Series Specifications

General

Brand	Rigol
Model	DS2000E Series
Category	Test Equipment
Language	English