Rigol DS2000E Series Programming Guide

RIGOL 2 Command System
2-176 DS2000E Programming Guide
:MEASure:RDELay
Syntax 1
:MEASure:RDELay <chanA>,<chanB>
Description 1
Enable the delay (rising edge-rising edge) measurement function between the two specified channels.
Syntax 2
:MEASure:RDELay? <chanA>,<chanB>
Description 2
Enable the delay (rising edge-rising edge) measurement function between the two specified channels and
return the measurement result (the unit is s).
Parameter
Name Type Range Default
<chanA> Discrete {CHANnel1|CHANnel2} --
<chanB> Discrete {CHANnel1|CHANnel2} --
Return Format
The query returns the delay (rising edge-rising edge) measurement result in scientific notation. When the
measurement result is invalid, the query returns 9.9e37.
Example
:MEASure:RDELay CHANnel1,CHANnel2
:MEASure:RDELay? CHANnel1,CHANnel2
You can use the following commands to enable the delay (rising edge-rising edge) measurement function
between the two specified channels and the statistic function of the measurement results as well as query
the statistic maximum value, minimum value, current value, average value, and standard deviation of the
delay (rising edge-rising edge) measurement results.
 :MEASure:RDELay:SMAXimum
 :MEASure:RDELay:SMINimum
 :MEASure:RDELay:SCURrent
 :MEASure:RDELay:SAVerage
 :MEASure:RDELay:SDEViation

Rigol DS2000E Series Specifications

General

Brand	Rigol
Model	DS2000E Series
Category	Test Equipment
Language	English