Rigol DS2000E Series Programming Guide

2 Command System RIGOL
DS2000E Programming Guide
2-207
:RECall:TRACe
Syntax
:RECall:TRACe <file_spec>
Description
Recall the trace file stored in the external memory.
Parameter
Name Type Range Default
<file_spec> ASCII string Refer to Explanation --
Explanation
 Beforing recalling the trace file, use the
:SAVE:TRACe[:STARt] command to store the corresponding
file into the external memory.
 <file_spec> includes the file storage directory and the filename with suffix. Its length cannot exceed
64 characters. Wherein, the storage directory can only be D:\.
Example
:RECall:TRACe D:\123.trc /*Recall the waveform trace file 123.trc stored in the D disk*/
:RECall:WAVeform
Syntax
:RECall:WAVeform <file_spec>
Description
Recall the waveform file stored in the external memory.
Parameter
Name Type Range Default
<file_spec> ASCII string Refer to Explanation --
Explanation
 Beforing recalling the waveform file, use the
:SAVE:WAVeform[:STARt] command to store the
corresponding file into the external memory.
 <file_spec> includes the file storage directory and the filename with suffix. Its length cannot exceed
64 characters. Wherein, the storage directory can only be D:\.
Example
:RECall:WAVeform D:\123.wfm /*Recall the waveform file 123.wfm stored in the D disk*/

Rigol DS2000E Series Specifications

General

Brand	Rigol
Model	DS2000E Series
Category	Test Equipment
Language	English