Rigol DS2000E Series Programming Guide

RIGOL 2 Command System
2-326 DS2000E Programming Guide
:WAVeform:YINCrement?
Syntax
:WAVeform:YINCrement?
Description
Query the unit voltage value of the channel source currently selected (refer to the
:WAVeform:SOURce
command) in the Y direction. The unit is the same as that of the signal source.
Explanation
YINCrement=VerticalScale/25
Return Format
The query returns the unit voltage value of the channel source currently selected in the Y direction in
scientific notation.
:WAVeform:YORigin?
Syntax
:WAVeform:YORigin?
Description
Query the vertical offset relative to the vertical reference position (refer to the
:WAVeform:YREFerence?
command) of the channel source currently selected (refer to the
:WAVeform:SOURce command) in the Y
direction.
Return Format
The query returns the vertical offset relative to the vertical reference position of the channel source
currently selected in the Y direction in integer.
:WAVeform:YREFerence?
Syntax
:WAVeform:YREFerence?
Description
Query the vertical reference position of the channel source currently selected (refer to
the
:WAVeform:SOURce command) in the Y direction.
Explanation
YREFerence is always 127 (the screen bottom is 0 and the screen top is 255).
Return Format
The query returns 127.

Rigol DS2000E Series Specifications

General

Brand	Rigol
Model	DS2000E Series
Category	Test Equipment
Language	English