Rigol DS2000E Series Programming Guide

RIGOL 2 Command System
2-168 DS2000E Programming Guide
:MEASure:PERiod
Syntax 1
:MEASure:PERiod <chan>
Description 1
Enable the period measurement function of the specified channel.
Syntax 2
:MEASure:PERiod? <chan>
Description 2
Enable the period measurement function of the specified channel and return the measurement result.
Parameter
Name Type Range Default
<chan> Discrete {CHANnel1|CHANnel2|MATH} --
Return Format
The query returns the period measurement result in scientific notation. When the measurement result is
invalid, the query returns 9.9e37.
Example
:MEASure:PERiod CHANnel1
:MEASure:PERiod? CHANnel1
You can use the following commands to enable the period measurement function of the specified channel
and the statistic function of the measurement results as well as query the statistic maximum value,
minimum value, current value, average value, and standard deviation of the period measurement results.
 :MEASure:PERiod:SMAXimum
 :MEASure:PERiod:SMINimum
 :MEASure:PERiod:SCURrent
 :MEASure:PERiod:SAVerage
 :MEASure:PERiod:SDEViation

Rigol DS2000E Series Specifications

General

Brand	Rigol
Model	DS2000E Series
Category	Test Equipment
Language	English