Rigol DS2000E Series

RIGOL 2 Command System
2-92 DS2000E Programming Guide
:CURSor:TRACk
 :CURSor:TRACk:SOURce1
 :CURSor:TRACk:SOURce2
 :CURSor:TRACk:CAX
 :CURSor:TRACk:CBX
 :CURSor:TRACk:CAY?
 :CURSor:TRACk:CBY?
 :CURSor:TRACk:AXValue?
 :CURSor:TRACk:AYValue?
 :CURSor:TRACk:BXValue?
 :CURSor:TRACk:BYValue?
 :CURSor:TRACk:XDELta?
 :CURSor:TRACk:YDELta?
 :CURSor:TRACk:IXDelta?
:CURSor:TRACk:SOURce1
:CURSor:TRACk:SOURce2
Syntax
:CURSor:TRACk:SOURce1 <source>
:CURSor:TRACk:SOURce1?
:CURSor:TRACk:SOURce2 <source>
:CURSor:TRACk:SOURce2?
Description
Set or query the channel source of cursor A in track measurement with cursor.
Set or query the channel source of cursor B in track measurement with cursor.
Parameter
Name Type Range Default
<source> Discrete {CHANnel1|CHANnel2|MATH|NONE} CHANnel1
Note: Only channels currently enabled can be selected as the channel source.
Return Format
The query returns CHAN1, CHAN2, MATH, or NONE.