Rigol DS2000E Series - Measure:overshoot

RIGOL 2 Command System
2-164 DS2000E Programming Guide
:MEASure:OVERshoot
Syntax 1
:MEASure:OVERshoot <chan>
Description 1
Enable the overshoot measurement function of the specified channel.
Syntax 2
:MEASure:OVERshoot? <chan>
Description 2
Enable the overshoot measurement function of the specified channel and return the measurement result.
Parameter
Name Type Range Default
<chan> Discrete {CHANnel1|CHANnel2|MATH} --
Return Format
The query returns the overshoot measurement result in scientific notation. When the measurement result
is invalid, the query returns 9.9e37.
Example
:MEASure:OVERshoot CHANnel1
:MEASure:OVERshoot? CHANnel1
You can use the following commands to enable the overshoot measurement function of the specified
channel and the statistic function of the measurement results as well as query the statistic maximum
value, minimum value, current value, average value, and standard deviation of the overshoot
measurement results.
 :MEASure:OVERshoot:SMAXimum
 :MEASure:OVERshoot:SMINimum
 :MEASure:OVERshoot:SCURrent
 :MEASure:OVERshoot:SAVerage
 :MEASure:OVERshoot:SDEViation